Table of Contents
Advertisement
Powering On
Each product built into the GO-500 Studio receives DC power from the power connection on the
rear of the RMK-6 unit of the GO-500 STUDIO.
Please ensure the RMK-6 is fed with a DC power supply before attempting to switch on the GO-500
STUDIO.
If a product within the GO-500 STUDIO fails to start after the power switch on the rear of the RMK-
6 is switched on please locate the on/off switch for that product which has not yet started.
For further advice on using a product within the GO-500 STUDIO please refer to the related manual.
Powering Off
Before powering off the GO-500 STUDIO via the power switch on the rear of the RMK-6 please
ensure the HDR-1 has been stopped.
Packing Away
Carefully fold the 10.1" TLM-102 monitor to its horizontal 1U shipping position. Please remember
to secure its position so it cannot move when in transit.
Now return the GO-500 STUDIO to the HC-800 case and the product is ready to be moved.
12
Advertisement
Table of Contents
