Sewing Stretch Fabrics And Elastic Tape - Brother 888-E30 Operation Manual

e Attach the presser foot holder to the right side
of the pin on zipper foot "I".
I
a Pin on the right side
b Needle drop point
f Select stitch .
CAUTION
● Turn the handwheel by hand to make sure the
needle does not hit the presser foot before you
start sewing. If you choose a different stitch, the
needle will hit the presser foot and break the
needle. You may also be injured.
g With the right side of the fabric facing up,
continue sewing with the zipper on the right
side of the presser foot.
Sew the stitching in order, from
CAUTION
● Make sure the needle does not hit the zipper
during sewing. If the needle hits the zipper, the
needle may break and you may be injured.
a Stitching
b Right side of fabric
c Basting stitching
d End of zipper opening
a c
to .
Memo
● If the presser foot contacts the zipper slider, leave
the needle lowered (in the fabric) and raise the
presser foot. After moving the slider so it will not
contact the presser foot, lower the presser foot and
continue sewing.
● To sew with the zipper on the left side of the presser
foot, attach the presser foot holder to the left side of
the pin on zipper foot "I" in step
I
When you have finished sewing, remove the
h
basting stitching.
SEWING STRETCH FABRICS
AND ELASTIC TAPE
Stretch fabrics can be sewn and elastic tape can be
attached.
Stitch Name
Stretch stitch J 03
3-point
J 05
zigzag stitch
Elastic-attach-
J 21
ing stitch
CAUTION
● Be sure to turn off the main power before
replacing the presser foot. Otherwise, injuries
may occur if the foot controller or
stop button) is accidentally pressed and the
machine starts sewing.
Observe the corresponding precautions when
performing each of the following stitching operations.
e
.
a Left side of the pin
b Needle drop point
Pattern No.
03 03 03 03 03
05 05 05 05 05
21 - - - -
(start/
3
03
05
-
37