Section 4 - Configuration
The multiple service set identifier (SSID) feature will allow you to create temporary zones that
can be used by guests to access the Internet. These zones will be separate from your main
wireless network. You may configure different zones for the 2.4 GHz and 5 GHz wireless bands.
In the Settings menu on the bar on the top of the page, click Wireless, then click the Multiple
SSID link.
2.4 GHz / 5 GHz
WLAN Interface:
Select the SSID.
Status:
Enable or disable the selected SSID.
Wi-Fi Name (SSID):
Create a name for your wireless network using up to 32 characters.
Password:
Create a password to use for wireless security. Wireless clients will
need to enter this password to successfully connect to the SSID.
Click Save when you are done.
D-Link DVA-2800 User Manual
Multiple SSID
Home
Settings
DVA-2800 HW:T1
FW:AU_2.01
Multiple SSID
Use this section to configure the wireless settings for your D-Link Router. Please make sure that any
changes made in this section will need to be updated on your wireless device.
Settings >> Wireless >> Multiple SSID
2.4GHz
WLAN Interface:
SSID1
Status:
Enabled
Wi-Fi Name (SSID):
dlink-2
Password:
A_Str0nG_P@ssW0rd!%!
5GHz
WLAN Interface:
SSID1
Status:
Enabled
Wi-Fi Name (SSID):
dlink-2
Password:
A_Str0nG_P@ssW0rd!%!
COPYRIGHT © 2017 D-Link
Features
Management
Wi-Fi
Save
⌵
⌵
45