Table of Contents
Advertisement
Chapter 2
3. Connect the modem to your router's Internet port with an Ethernet cable.
4. Turn on the modem, and then wait about 2 minutes for it to restart.
5. Connect the power adapter to the router and turn on the router.
6. Verify that the following LEDs are on and solid to confirm the harware is connected
correctly.
Power
On
Note:
• If all the LEDs are off, press the LED On/Off button
• If the 2.4GHz, 5GHz and 60GHz LEDs are off, press and hold the Wi-Fi On/Off button
a few seconds, all the three LEDs should turn solid on.
7. Connect your computer to the router.
• Method 1: Wired
Turn off the Wi-Fi on your computer and connect the devices as shown below.
• Method 2: Wirelessly
1 ) Find the SSID (Network Name) and Wireless Password printed on the label at
the bottom of the router.
2 ) Click the network icon of your computer or go to Wi-Fi Settings of your smart
device, and then select the SSID to join the network.
Computer
Connections are available
Wireless Network Connection
TP-LINK_XXXX
TP-LINK_XXXX_5G
TP-LINK_XXXX_60G
Connect automatically
√
2.4GHz
5GHz
On
On
for 1 second, and then check the LEDs again.
Ethernet Cable
or
Connect
Connect the Hardware
60GHz
Internet
On
On
for about 2 seconds. Within
Smart Device
<
Settings
Wi-Fi
Wi-Fi
CHOOSE A NETWORK...
TP-LINK_XXXX
TP-LINK_XXXX_5G
TP-LINK_XXXX_60G
Other...
9
Advertisement
Table of Contents
