Table of Contents
Advertisement
of the root router is 192.168.0.1, the IP address of the extended router can be
192.168.0.2~192.168.0.254. We take 192.168.0.2 as example.)
2 ) Click Save.
Note: Log in to the web management page again if the IP address of the router is altered.
3. Survey the SSID to be bridged:
1 ) Go to
Advanced
2.4GHz
and untick the
2 ) Go to
Advanced
Wireless
section, click
3 ) Click Survey, locate the root router's SSID and click
TP-Link_4F98 as example).
4 ) If the root router has wireless password, you should enter the wireless password
of the root router.
5 ) Click Save.
4. Disable DHCP:
1 ) Go to
Network
2 ) Deselect
Enable DHCP Server
Now you can go to
Advanced
WDS status
is Run, it means WDS bridging is successfully built.
Q5. What should I do if I cannot access the internet even though the
>
Guest Network
Enable Guest Network
>
System Tools
>
System Parameters
Enable WDS
>
DHCP
Server.
and click Save.
>
Status
>
Wireless
and focus on the
Wireless
checkbox.
and focus on the
Bridging.
Choose
to check the WDS status. When the
section. Click
2.4GHz
(Here we take
102
Advertisement
Table of Contents
