Guest Authorization Set - Kyocera ECOSYS M2540dw Operation Manual

User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration

Guest Authorization Set.

When User Login Administration is enabled, set the functions that guest users who cannot log in to the machine are
allowed to use.
NOTE
To use Guest Authorization Set., User Login Administration must be enabled in "Enabling User Login Administration".
Enabling User Login Administration (page 9-3)
Enabling Guest Authorization
1
2
Display the screen.
1
[System Menu/Counter] key > [▲] [▼] key > [User/Job Account] > [OK] key
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator privileges.
The factory default login user name and login password are set as shown below.
Model Name
ECOSYS M2135dn/ECOSYS
M2635dn/ECOSYS M2635dw
ECOSYS M2040dn/ECOSYS
M2540dn/ECOSYS M2540dw
2
[▲] [▼] key > [User Login Set.] > [OK] key > [▲] [▼] key > [Guest Auth. Set.] >
[OK] key > [▲] [▼] key > [Guest Auth.] > [OK] key
Configure the setting.
[▲] [▼] key > [On] or [Off] > [OK] key
NOTE
If the guest authorization setting is enabled, the [Authentication/Logout] key must be
selected when logging in.
In the guest user default settings, only monochrome copying can be used. If you wish to use
a different function, log in as a user who can use that function, or change the settings in the
guest properties.
Login User Name
3500
4000
9-16
Login Password
3500
4000