Adding A User (Local User List) - Kyocera ECOSYS M2540dw Operation Manual

User Authentication and Accounting (User Login, Job Accounting) > Setting User Login Administration

Adding a User (Local User List)

This adds a new user. You can add up to 100 users (including the default login user name).
NOTE
By default, one of each default user with machine administrator rights and administrator privileges is already stored.
Each user's properties are:
Machine Administrator
User Name: DeviceAdmin
Login User Name:
ECOSYS M2135dn/ECOSYS M2635dn/ECOSYS M2635dw: 3500
ECOSYS M2040dn/ECOSYS M2540dn/ECOSYS M2540dw: 4000
Login Password:
ECOSYS M2135dn/ECOSYS M2635dn/ECOSYS M2635dw: 3500
ECOSYS M2040dn/ECOSYS M2540dn/ECOSYS M2540dw: 4000
Access Level: Machine Administrator
Administrator
User Name: Admin
Login User Name: Admin
Login Password: Admin
Access Level: Administrator
* Upper case and lower case letters are distinguished (case sensitive).
It is recommended to periodically change the user name, login user name and login password regularly for your
security.
1
Display the screen.
1
[System Menu/Counter] key > [▲] [▼] key > [User/Job Account] > [OK] key
NOTE
If the login user name entry screen appears during operations, enter a login user name
and password, and select [Login]. For this, you need to login with administrator privileges.
The factory default login user name and login password are set as shown below.
Model Name
ECOSYS M2135dn/ECOSYS
M2635dn/ECOSYS M2635dw
ECOSYS M2040dn/ECOSYS
M2540dn/ECOSYS M2540dw
2
[▲] [▼] key > [User Login Set.] > [OK] key > [▲] [▼] key > [Local User List] > [OK] key >
[Menu] > [▲] [▼] key > [Add User] > [OK] key
Login User Name
3500
4000
9-6
Login Password
3500
4000