Cisco Nexus 9000 Series Configuration Manual page 43

Using Modular QoS CLI
SUMMARY STEPS
1. configure terminal
2. class-map type qos [match-any | match-all] class-name
3. exit
4. class-map type queuing match-any class-name
5. exit
6. show class-map [type qos [ class-name]]
7. show class-map [type queuing [ class-name]]
8. copy running-config startup-config
DETAILED STEPS
Command or Action
Step 1
configure terminal
Example:
switch# configure terminal
switch(config)#
Step 2 class-map type qos [match-any | match-all] class-name
Example:
switch(config)# class-map type qos class1
switch(config-cmap-qos)#
Step 3
exit
Example:
switch(config-cmap-qos)# exit
switch(config)#
Step 4 class-map type queuing match-any class-name
Example:
switch(config)# class-map type queuing match-any
c-out-q2
switch(config-cmap-que)#
Step 5 exit
Example:
switch(config-cmap-que)# exit
switch(config)#
Step 6
show class-map [type qos [ class-name]]
Example:
switch(config)# show class-map type qos
Step 7 show class-map [type queuing [ class-name]]
Example:
switch(config)# show class-map type queuing
Purpose
Enters global configuration mode.
Creates or accesses the class map of type qos and then enters
class-map qos mode. Class-map names can contain
alphabetic, hyphen, or underscore characters, are case
sensitive, and can be up to 40 characters.
Exits class-map qos mode and enters global configuration
mode.
Creates or accesses the class map of type queuing and then
enters class-map queuing mode.
Exits class map queuing mode and enters global
configuration mode.
(Optional) Displays information about all configured class
maps, all class maps of type qos, or a selected class map of
type qos.
(Optional) Displays information about all configured class
maps, all class maps of type queuing, or a selected class
map of type queuing.
Cisco Nexus 9000 Series NX-OS Quality of Service Configuration Guide, Release 7.x
Configuring or Modifying a Class Map
29