Picture Menu - BenQ Home Entertainment Series User Manual

PICTURE menu

The projector is preset with several predefined picture modes so that you can
choose one to suit your operating environment and input signal picture type.
• Bright: Maximizes the brightness of the projected image. This mode is suitable
• Vivid TV: Being slightly brighter than Cinema mode, it is suitable for playing
• Cinema: With well-balanced color saturation and contrast with a low brightness
• Sport: Best for watching indoor matches, e.g. basketball, volleyball, and
• Football: Perfect for watching games on the field, e.g. football and soccer.
Picture Mode
• Silence: Minimizes the acoustic noise. It is suitable for the need of watching
• User 1/User 2: Recalls the settings customized based on the current available
• 3D: Optimized to bring up 3D effects when watching 3D contents.
This mode is only available when 3D function is enabled.
• HDR: Delivers High Dynamic Range effects with higher contrasts of brightness
There are two user-definable modes if the current available picture modes are not
suitable for your need. You can use one of the picture modes (except the User
1/User 2) as a starting point and customize the settings.
• Load Settings From
User Mode
1. Go to PICTURE > Picture Mode.
Management
2. Press
3. Press
for environments where extra-high brightness is required, such as using the
projector in well lit rooms.
movies in rooms where there is a small amount of ambient light, e.g. your living
room.
level, this is most suitable for enjoying movies in a totally dark environment (as you
would find in a commercial cinema).
badminton.
movies that requires an ultra-quiet environment so that you won't be disturbed by
the noise of the projector. This mode is only available when the DISPLAY >
Silence menu is set at On.
picture modes. See User Mode Management on page
and colors. This mode is only available when:
1. DISPLAY > HDR is set at Auto, and HDR content is detected.
2. DISPLAY > HDR menu is set at HDR.
/ to select User 1 or User 2.
to highlight User Mode Management, and press OK. The User
Mode Management page is displayed.
27.
Menu operation 27