Changing Your Active Route; Shaping Your Route - Garmin DRIVE 51 Owner's Manual

NOTE: Detailed parking data is not available in all areas or
for all parking locations.
3 Select a parking location, and select Go! > Add As Next
Stop.
The device guides you to the parking area.
After you park your vehicle, you can continue to your destination
on foot using your Garmin Drive device or a compatible Garmin
watch with Connect IQ (Finding Your Destination Using Your
Garmin Watch, page 4). Your device or Garmin watch can
also guide you back to this parking spot when you return to your
vehicle (Finding Your Last Parking Spot, page
Finding Your Destination Using Your Garmin Watch
Before you can use this feature, you must set up Watch Link
(Setting Up Watch Link, page
NOTE: This feature is available only for Garmin Drive models
with Bluetooth wireless technology. This includes models
®
ending in LMT-S.
You can use your compatible Garmin watch to navigate from
your vehicle to your destination, or from your destination back to
your vehicle. This feature is especially useful for finding a
location within a large venue, or when you have to park away
from your destination and finish navigating on foot.
NOTE: GPS technology requires a clear view of the sky. The
Watch Link app may not be able to provide guidance in indoor
venues, such as shopping malls or airports.
1
On your watch, start the Watch Link app, and select Find My
Destination.
Your watch acquires a GPS signal and starts guiding you to
your destination.
2
Walk toward your destination.
The destination indicator
destination relative to the direction you are moving
the destination indicator appears at the top of the circle, you
are heading toward your destination. The remaining distance
to your destination appears below the circle. The progress
bar shows your progress toward your destination.
Finding Your Last Parking Spot
When you disconnect your Garmin Drive device from vehicle
power, it saves your current location as a parking spot. If you
have set up Watch Link, the device sends the parking spot
location to your compatible Garmin watch
Link, page 12). You can navigate back to your parking spot
using either your Garmin Drive device or the Watch Link app on
your watch.
TIP: If your Garmin Drive device is connected to a switched
power outlet, it saves your parking spot each time you turn off
your vehicle. If your device is connected to an non-switched
power outlet, you must unplug the vehicle power cable to save
your parking spot.
• On your Garmin Drive device, select Apps > Last Spot >
Go!.
• On your watch, start the Watch Link app, select Find My Car,
and walk toward your parking spot.
4
4).
12).
shows the direction of your
. When
(Setting Up Watch
NOTE: This feature is available only for Garmin Drive models
with Bluetooth wireless technology. This includes models
ending in LMT-S.
The destination indicator
destination relative to the direction you are moving
the destination indicator appears at the top of the circle, you
are heading toward your destination. The remaining distance
to your destination appears below the circle. The progress
bar shows your progress toward your destination.

Changing Your Active Route

Adding a Location to Your Route
Before you can add a location to your route, you must be
navigating a route (Starting a Route, page
You can add locations to the middle or end of your route. For
example, you can add a fuel station as the next destination in
your route.
TIP: To create complex routes with multiple destinations or
scheduled stops, you can use the trip planner to plan, schedule,
and save a trip (Planning a Trip, page
1
From the map, select
2
Search for a location (Finding and Saving Locations,
page 6).
3
Select a location.
4
Select Go!.
5
Select an option:
• To add the location as the next destination in your route,
select Add As Next Stop.
• To add the location to the end of your route, select Add
As Last Stop.
• To add the location and edit the order of destinations in
your route, select Add to Active Route.
The device re-calculates the route to include the added location
and guides you to the destinations in order.

Shaping Your Route

Before you can shape your route, you must start a route
(Starting a Route, page 3).
You can manually shape your route to change its course. This
allows you to direct the route to use a certain road or go through
a certain area without adding a destination to the route.
1
Touch anywhere on the map.
2 Select .
The device enters route shaping mode.
3
Select a location on the map.
TIP: You can select to zoom in on the map and select a
more precise location.
The device recalculates the route to travel through the
selected location.
4
If necessary, select an option:
• To add more shaping points to the route, select additional
locations on the map.
• To remove a shaping point, select
shows the direction of your
3).
14).
> Where To?.
.
Navigating to Your Destination
. When