Table of Contents
Advertisement
Overview
• 930-W DC power supply with port-side intake airflow (burgundy coloring) (NXA-PDC-930W-PI)
• 1200-W HVAC/HVDC power supply with dual-direction airflow (white coloring)
The following figure shows the hardware features seen from the port side of the chassis.
1
Chassis LEDs (Beacon [BCN], Status [STS], and
Environment [ENV])
2
Port lane LEDs
3
Port lane switch button
To determine which transceivers, adapters, and cables this switch supports, see the
Compatibility Information
The following figure shows the hardware features seen from the power supply side of the chassis.
1
Two power supplies (one used for operations and
one used for redundancy) (AC power supplies
shown) with power supply slot 1 on the left and
slot 2 on the right
Cisco Nexus 93180LC-EX NX-OS Mode Hardware Installation Guide
2
(N9K-PUV-1200W)
Note
If you use the 1200-W HVAC/HVDC power supply, the power supply
automatically uses the same airflow direction as used by the fan
modules installed in the same switch.
document.
4
Interface ports (32)
• Downlink ports (ports 1-28)
• Uplink ports (ports 29-32)
5
Screw holes (6) for attaching rack mounting
brackets
6
Grounding pad
Cisco Transceiver Modules
6
Management port (SFP+ port)
Overview
Advertisement
Table of Contents
