Sony HDR-CX620 How To Use Manual page 87

you want to connect to as the SSID of the camera.
When using the Multi Camera Control Function on this product, this product should only
be connected to the camera you want to connect to via Wi-Fi and not other Wi-Fi access
points. If you choose to connect this product to other Wi-Fi access points, then you do so
at your own risk. This product may be subject to unauthorized access and any content
communicated may be at risk of interception.
[77] How to Use
product
Connecting this product to more than one camera with
Multi Camera Control (Multi Connection)
You can connect this product with other cameras via Wi-Fi. By connecting via Wi-Fi, you can
control other cameras with this product.
1. Turn on the power of the cameras you want to connect and set them in a state ready for
Wi-Fi connection.
For details on the operation, refer to the instructions manual of the cameras.
2. Turn on this product, then select
Set] - [Multi Connection].
3. Select
4. Select .
5. Select [Connect Device Reg].
This product enters registration waiting status (registration waiting status ends in
about 2 minutes).
6. Perform connecting operation on the camera you want to connect with this product.
For details on the Wi-Fi connection, refer to the instruction manuals of the cameras.
7. Select [OK] when it is displayed on the screen of the product to finish the registration.
8. Repeat steps 4 to 7 for each camera you want to connect.
Note
A maximum of five cameras (compatible with Multi Camera Control) can be registered to
Using the Wi-Fi function
- [Wireless] - [ Function] - [Multi Camera Control].
Controlling other cameras through this
- [Wireless] - [ Setting] - [Multi Camera Ctrl