Operating The Blade-Control Switch (Pto) - Toro TITAN ZX4800 Operator's Manual

Stopping the Engine
CAUTION
Injury can occur if children or bystanders
move or attempt to operate the machine while
it is unattended.
Always remove the ignition key and set the
parking brake when leaving the machine
unattended, even if just for a few minutes.
Stop the engine as shown in
Figure 15
Figure 16.
g028223
Operating the
Blade-Control Switch
(PTO)
The blade-control switch (PTO) starts and stops the
mower blades and any powered attachments.
Engaging the Blade-Control
Switch (PTO)
Engage the blade-control switch (PTO) with the
throttle position at F
Note:
Engaging the blade-control switch (PTO) with
the throttle position at half or less will cause excessive
wear to the drive belts.
20
Figure 16
.
AST
g028224