Product Overview; Controls - Toro 07287 Operator's Manual

Product Overview

3
1. Steering wheel
2. Parking brake

Controls

Accelerator Pedal
The accelerator pedal (Figure 4) gives you the
ability to vary ground speed of the vehicle.
Pressing the pedal when the On/Off switch is
on starts the motor. Pressing the pedal farther
increases ground speed. Releasing the pedal will
slow the vehicle and the motor will stop running.
Figure 4
1. Accelerator pedal
1
2
Figure 3
3. Towing tongue
4. Charging receptacle
2. Brake pedal
6
4 5
5. Cargo box release lever
6. Cargo box
Brake Pedal
The brake pedal is used to stop or slow the vehicle
(Figure 4).
Brakes can become worn or can be
misadjusted resulting in personal injury.
If brake pedal travels to within 1 inch
(25 mm) of the vehicle floor board, the
brakes must be adjusted or repaired.
Parking Brake
The parking brake is between the seats (Figure 5).
Whenever the vehicle is shut off or when leaving
the vehicle, the parking brake must be engaged
to prevent accidental movement of the vehicle.
To engage the parking brake, pull back on the
lever. To disengage, push the lever forward. If the
vehicle is parked on a steep grade, make sure that
the parking brake is applied. Place blocks at the
downhill side of the wheels.
13
G005085