Table of Contents
Advertisement
Operation
The Smart Turn
Feature
The Smart Turn
Steering feature automatically
lowers the speed of the tractor in tight turns. The
decrease in speed is directly proportional to the
sharpness of the turn, up to a maximum speed
reduction of 40 percent. This allows you to make
turns at higher speeds without having to change the
speed control position. After the turn, the original
speed is automatically restored.
The Smart Turn
Steering feature does not affect
engine speed.
This system was set at the factory and should not
need adjustment.
POTENTIAL HAZARD
Excessive speed when turning can result in
rollover accidents.
WHAT CAN HAPPEN
Rollover accidents can result in serious
injury or death.
HOW TO AVOID THE HAZARD
Do not rely on the Smart Turn
feature to avoid accidents while turning.
Do not set the cruise control at higher
speeds when operating on uneven terrain
or slopes.
Read, understand, and follow all
instructions in the operator's manual and
on the machine before starting.
24
Steering
Steering
Pushing the Machine by Hand
IMPORTANT: Always push the machine by
hand. Never tow the machine because
transmission damage may occur.
To Push the Machine
1.
Disengage the power take off (PTO) and turn the
ignition key to "STOP" to stop the engine.
2.
Move the High–Low range lever to the neutral
position "N." This allows the rear wheels to turn
freely.
3.
Place the lever back in High or Low after
moving the machine, and set the parking brake.
Advertisement
Table of Contents
