Table of Contents
Advertisement
Operation
Positioning the Seat
The seat can move forward and backward. Position
the seat where you have the best control of the
machine and are most comfortable.
1.
To adjust, move the lever sideways to unlock
seat (Fig. 20).
2.
Slide the seat to the desired position and release
the lever to lock the seat into position.
IMPORTANT: Be sure that the seat is locked
in position before operating.
1
Figure 20
1. Adjustment lever
Headlights and Taillights
The headlights and taillights are turned on by turning
the ignition key to the LIGHTS position. They can
be turned on even if the engine is not running.
Remove the key when leaving the machine
unattended so that the headlights cannot be turned on
and discharge the battery.
Figure 21
1. Lights
22
Positioning the Tilt Steering
Wheel
The steering wheel has four tilt locations. Position the
steering wheel where you have the best control of the
machine and are most comfortable.
1.
2.
m–3320
1. Tilt lever
1
m–3312
Lift the tilt lever to release the lock (Fig. 22).
Move the steering wheel to a comfortable
position; then release the lever to lock it in place.
1
Figure 22
2. Steering wheel
2
m–3259
Advertisement
Table of Contents
