Throttle Lever - Yamaha GRIZZLY 350 YFM35GY Owner's Manual

EBU18100
Start switch " "
Push this switch to crank the engine with the start-
er.
ECB00050
NOTICE
See the starting instructions on page 6-1 prior
to starting the engine.
4
EBU18160
Light switch "
Set this switch to "
the taillight and the meter lighting. Set the switch
to " " to turn on the high beams, the taillight and
the meter lighting. Set the switch to "OFF" to turn
off all the lights.
ECB00040
NOTICE
Do not use the headlights with the engine
turned off for an extended period of time, oth-
erwise the battery may discharge to the point
that the starter motor will not operate properly.
If this should happen, remove the battery and
recharge it.
/ /OFF"
" to turn on the low beams,
EBU18170
Horn switch "
Press the switch to sound the horn.
EBU18280

Throttle lever

Once the engine is running, movement of the throt-
tle lever will increase the engine speed.
Regulate the speed of the ATV by varying the
throttle position. Because the throttle is spring-
loaded, the ATV will decelerate, and the engine will
return to an idle any time the hand is removed from
the throttle lever.
1. Throttle lever
4-4
"