Using Call Forwarding (Hipath 4000) - Siemens optiPoint 500 economy User Manual

Forwarding calls
Step by Step
66 66 66 66

Using call forwarding (HiPath 4000)

You can program two types of call forwarding:
• Station fixed forwarding
• station variable forwarding
With station fixed forwarding you can program a for-
warding destination that will remain valid until you
change or delete it. This forwarding function can be
switched on and off.
With station variable forwarding you can choose be-
tween 6 different types of forwarding:
• Station variable unconditional/all forwarding
– forwarding for internal calls only
– forwarding for external calls only
– forwarding for both internal and external calls
• Forwarding for busy (int/ext)
• Forwarding after no answer (int/ext)
• Forwarding for busy and ring no answer
Call forwarding is activated when a forwarding destina-
tion is programmed. When the station variable forward-
ing function is switched off, the forwarding destination
is automatically deleted
When forwarding is activated you can see the following
display in the idle menu:
Forwarding type
Station fixed forwarding
Station variable forwarding
Forwarding for internal/ex-
ternal calls only
Forwarding for busy
Forwarding after time
Forwarding for busyand
ring no answer
Station fixed forwarding
See Æ page 74 or Æ page 75 to find out how to acti-
vate/de-activate call forwarding via codes or an installed
forwarding key.
1. Station fixed forwarding is optional
1
, and
Display message
Forwarding to e.g. 222
Klaus Meier (own number)
Forwarding for internal/ex-
ternal On
Forwarding on busy On
Forwarding on timeout On
Forwarding on busy or
timeout On
Fixed forwarding On