TP-Link Auranet Series User Manual page 63

Enable SNMP Agent and the SNMP Agent will collect the information of this
SNMP Agent:
device and respond to information requests from one or more management
systems.
Enter the textual identification of the contact person for this managed node.
SysContact:
Enter an administratively-assigned name for this managed node.
SysName:
Enter the physical location of this managed node.
SysLocation:
Community refers to a host group aiming at network management. Get
Get
Community only has the read-only right of the device's SNMP information.
Community:
The community name can be considered a group password. The default
setting is public.
Defines the IP address (for example, 10.10.10.1) or subnet for management
Get Source:
systems that can serve as Get Community to read the SNMP information of this
device. The format of subnet is ''IP address/bit'' (such as 10.10.10.0/24). The
default is 0.0.0.0, which means all hosts can read the SNMP information of this
device.
Set Community has the read and write right of the device's SNMP
Set Community:
information. Enter the community name that allows read/write access to the
device's SNMP information. The community name can be considered a group
password. The default setting is private.
Defines the IP address (for example, 10.10.10.1) or subnet for management
Set Source:
systems that can serve as Set Community to read and write the SNMP
information of this device. The format of subnet is ''IP address/bit'' (such as
10.10.10.0/24). The default is 0.0.0.0, which means all hosts can read and write
the SNMP information of this device.
Figure 7-12 SNMP Page
52