Table of Contents
Advertisement
Connecting the USB cable
After you have completed connecting the DP-mDP cables, follow the procedure below
to connect the USB 3.0 cable to the computer and complete your monitor setup:
1
a. Connect one computer:
Connect the upstream USB 3.0 port (cable supplied) to an appropriate USB 3.0 port
on your computer.
b. Connect two computers:
Connect the upstream USB 3.0 ports to appropriate USB 3.0 ports on the two
computers. Then use the OSD menu to select between the two USB upstream
sources and input sources. See
NOTE: When connecting two computers to the monitor, the monitor's USB
downstream ports for the keyboard and mouse can be assigned to different input
signals from the two computers by changing the USB Selection setting from the
OSD menu. (See
2
Connect the USB 3.0 peripherals to the downstream USB 3.0 ports on the monitor.
3
Plug the power cables for your computer and monitor into nearby outlet.
4
Turn On the monitor and the computer.
If your monitor displays an image, installation is complete. If it does not display an
image, see Troubleshooting.
USB Select
USB Selection
for details)
a. Connect one computer
b. Connect two computers
Switch.
Setting Up the Monitor
|
29
Advertisement
Table of Contents
