Mercury 200 OptiMax Manual page 78

2. Remove the hose cable tie and pull the air filter off the hose.
a
b
c
d
e
a - Air filter
b - Nylon washer
c - Rubber washer
INSTALLATION
1. Place the nylon washer and rubber washer onto the air filter
and insert the filter into the housing. Rotate the filter 1/4 turn
to the lock position.
2. Position the filter housing so that the inlet hose is facing
towards the back of the engine. Reinstall the hose and secure
with a cable tie.
MAINTENANCE
f
70
d - Clamp
e - Filter housing
f - Cable tie
28732