Lane Information And Signposts; Junction View - Clarion NX405 Owner's Manual

2.3.6 Lane information and signposts

When navigating on multi-lane roads, it is important to take the appropriate lane in order to follow the
planned route. If lane information is available in the map data, NX405 displays the lanes and their
directions using small arrows at the bottom of the map. Highlighted arrows represent the lanes and the
direction you need to take.
Where additional information is available, arrows are replaced by signposts. Signposts are displayed at
the top of the map. The color and style of the signposts are similar to the real ones you can see above
roads or by roadsides. They show the available destinations and the road numbers.
All signposts look similar when cruising (when there is no planned route). During navigation only the
signpost that points to the lane(s) to be taken is highlighted; all the others are darker.
If you want to hide the currently displayed signposts, tap any of them and the normal Navigation view
returns until new signpost information is received.
You can modify the signpost settings in

2.3.7 Junction view

If you are approaching a freeway exit or a complex intersection and the needed information exists, the
map is replaced with a 3D view of the junction. The lanes you need to take are displayed with arrows. At
the top of the screen, road signs show you additional information.
If you want to hide the currently displayed junction and return to the Navigation view, tap the picture.
Approaching the destination.
(page 79).
Clarion NX405 English 19