Option Parts; Wireless Kit (Rcn-E1R) - Mitsubishi Heavy Industries KXZ Series Technical Manual

10. OPTION PARTS

10.1 Wireless kit (RCN-E1R)

WIRELESS REMOTE CONTROLLER INSTALLATION MANUAL
Notes :
Following functions of FDE indoor unit series are not able to be set with this wireless remote control (RCN-E1R).
1. Flap control system
WIRELESS REMOTE CONTROLLER INSTALLATION MANUAL
2. 4-fan speed setting (P-Hi/Hi/Me/Lo) → 3-fan speed setting (Hi/Me/Lo)
 Fasten the wiring to the terminal securely and hold the cable securely so as not to apply unexpected stress on the terminal.
 Make sure the power source is turned off when electric wiring work.
 Fasten the wiring to the terminal securely and hold the cable securely so as not to apply unexpected stress on the terminal.
Otherwise, electric shock, malfunction and improper running may occur.
 Make sure the power source is turned off when electric wiring work.
Otherwise, electric shock, malfunction and improper running may occur.


① Accessories
① Accessories
Please make sure that you have all of the following accessories.
Remoto control holder
Please make sure that you have all of the following accessories.
Remoto control holder
1
1
② Installation of the control holder
② Installation of the control holder
CAUTION DO NOT install it on the following places.
1. Places exposed to direct sunlight
3. Places near heat devices
CAUTION DO NOT install it on the following places.
5. High humidity places
1. Places exposed to direct sunlight
3. Places near heat devices
5. High humidity places
Installation tips for the remote control holder
• Adjust and keep the holder up right.
Installation tips for the remote control holder
• Tighten the screw to the end to avoid scratching the
remote control.
• Adjust and keep the holder up right.
• DO NOT attach the holder on plaster wall.
• Tighten the screw to the end to avoid scratching the
remote control.
• DO NOT attach the holder on plaster wall.
How to insert batteries
① Detach the back lid.
How to insert batteries
① Insert the batteries. (two AAA batteries)
① Reattach the back lid. ① Detach the back lid.
① Insert the batteries. (two AAA batteries)
① Reattach the back lid.
WARNING
WARNING
CAUTION
CAUTION
AAA dry cell battery (RO3)
AAA dry cell battery (RO3)
2
2
2. Hot surface or cold surface enough to generate condensation
4. Places exposed to oil mist or steam directly.
6. Uneven surface
2. Hot surface or cold surface enough to generate condensation
4. Places exposed to oil mist or steam directly.
6. Uneven surface
00
–
Wood screw for holder
Wood screw for holder
2
2
Wood screw
Wood screw
–
'15 • KX-T-235
PFA012D620
PFA012D620
Wireless remote control
Wireless remote control
1
1
Holder for
remote control
Holder for
remote control
Ensure the correct
polarity when
inserting.
Ensure the correct
polarity when
inserting.

1

1