Connecting Optional Devices; Optional Device Connections - VeriFone VX 520 GPRS CTLS Installation Manual

6
Figure 12
Before inserting the MSAM card, position it as shown in
NOTE
gold contacts facing down. The cardholder connector base has an image
resembling the notched corner of an MSAM card to ensure the card is positioned
correctly.
7
Connecting
The VX 520 GPRS CTLS terminal supports some peripheral devices designed for
Optional
use with electronic point-of-sale terminals.
Devices
Before connecting any peripheral device, remove the power cord from the
CAUTION
terminal and ensure that the green indicator LED is not lit. Reconnect the power
cord only after you are finished connecting the peripheral device(s). For complete
information about peripheral installation and use, refer to the user documentation
supplied with those devices.
Different terminals support different devices, so for more information about
optional devices, please contact your VeriFone distributor.
Optional Device
The VX 520 GPRS CTLS terminal has a port that can operate either as a PIN pad
Connections
port or an RS-232 port, depending on the power source available.
Install an MSAM card by carefully sliding it into the slot until it is fully inserted.
Installing an MSAM Card in a VX 520 GPRS CTLS Terminal
Close the MSAM cardholder panel, and then replace the terminal rear cover.

Connecting Optional Devices

Figure 12, with the card's
VX 520 GPRS CTLS I
NSTALLATION
T S
ERMINAL ETUP
23
G
UIDE