Supported Audio Formats; Specifications - Sony HT-XT3 Operating Instructions Manual

Supported audio formats

Audio formats supported by this system
are as follows.
[HDMI1]
Format
[HDMI2]
[HDMI3]
LPCM 2ch
LPCM 5.1ch
LPCM 7.1ch
Dolby Digital
Dolby TrueHD,
Dolby Digital Plus
DTS
DTS-ES Discrete 6.1,
DTS-ES Matrix 6.1
DTS96/24
DTS-HD High
Resolution Audio
DTS-HD Master
Audio
DTS-HD Low Bit
Rate
DSD
: Supported format.
: Unsupported format.
* Decoded as DTS core.
Input
[TV]
(DIGITAL IN)
 
 
 
 
 
 
* *
* *
 
 
 
 

Specifications

Amplifier section
USA models only:
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
(FTC)
Front L + Front R:
With 4 ohms loads, both channels
driven, from 300 Hz – 20,000 Hz; rated
50 watts per channel minimum RMS
power, with no more than 1% total
harmonic distortion from
250 milliwatts to rated output.
POWER OUTPUT (reference)
Front L/Front R speaker:
115 W (per channel at 4 ohms, 1 kHz)
Subwoofer:
120 W (at 4 ohms, 80 Hz)
Other models:
POWER OUTPUT (rated)
Front L + Front R:
50 W + 50 W (at 4 ohms, 1 kHz, 1% THD)
POWER OUTPUT (reference)
Front L/Front R speaker:
115 W (per channel at 4 ohms, 1 kHz)
Subwoofer:
120 W (at 4 ohms, 80 Hz)
Inputs
HDMI IN 1*/2/3
TV (DIGITAL IN)
ANALOG IN
Output
HDMI OUT* (ARC)
* HDMI IN 1 and HDMI OUT jacks support
HDCP 2.2 protocol. HDCP 2.2 is newly
enhanced copyright protection
technology that is used to protect
content such as 4K movies.
HDMI section
Connector
Type A (19pin)
USB section
(USB) port:
Type A (For connecting USB memory,
memory card reader, and digital still
camera)
47
US