Audio Setting - Sanyo FWDP105F B Owner's Manual

C

Audio Setting

Choose the appropriate Audio Settings for your device� It only affects the Sound during DVD Playback� Follow steps 1 and 2 on
page 15�
3
Select the desired item�
<AUDIO menu>
Audio Out Bitstreem
Dynamic Range PCM
Note(s):
Audio Out:
– Bitstream:
Connecting to a Dolby Digital decoder for Dolby Digital Audio output�
– PCM:
Connecting to another device (an MD deck or DAT deck etc�) without a Dolby Digital Decoder�
Convert the Dolby Digital into LPCM (2 channel)�
• This unit does not support DTS audio� This is not a malfunction�
You need to set this unit to "Bitstream" in the "Audio Out" Menu and also need to Connect to a TV or Amplifier that supports
DTS, then the audio will be output as DTS�
It is only available when connected via the Coaxial jack�
EN
4
Audio Out: (Default: PCM)
Set to "Bitstream" when the unit is connected to a
Dolby Digital decoder�
– Bitstream: outputs a Dolby Digital signals�
– PCM: convert the Dolby Digital into PCM (2 channel)�
Audio Out Bitstreem
Dynamic Range PCM
Dynamic Range (Default: 0)
Adjusts for Clarity even when the Volume is Low, by
Compressing the Range of the lowest sound level and
the highest sound level�
Audio Out
Dynamic Range
8
- 6
- 4
- 2
0
– 18 –
Select the Desired
Setting.
5
To Exit the Menu