Roger Beep (End Of Transmission) Tone; Silent Operation; Noaa Weather Radio - Midland EX37 Manual

E-ready emergency two way radio
Table of Contents

Advertisement

EX37
VOX
To set VOX, press the MENU button until the display shows "VOX." A
flashing icon will appear to the right of the CHANNEL NUMBER.
L L \ M M
buttons and push the PTT
Select "on" or "oF" by pressing the
key, or press the MENU button again to move to the next feature
setting.

ROGER BEEP (end of transmission) TONE

When the PTT button is released, the radio will beep to confirm to
other users that your transmission has finished.
To set the ROGER BEEP tone, press the MENU button until the
L L \M M
display shows an "rb" icon. Select "on" or "oF" by pressing the
buttons and push the PTT key, or press the MENU button to move to
the next feature setting.

SILENT OPERATION

Your radio has a SILENT OPERATION mode. In this mode, all
"beeps" and "tones" are disabled.
To set SILENT OPERATION, press the MENU button until the display
L L \M M
shows a "bP" icon. Select "on" or "oF" by pressing the
buttons
and push the PTT key or MENU button.
Your radio has a NOAA WEATHER RADIO function to enable the

NOAA WEATHER RADIO

user to receive weather reports from designated NOAA stations.
To turn the NOAA WEATHER RADIO on, press and hold the WX/
L L
button for 5 seconds while in GMRS mode. The radio will go to WX
Band mode.
To set the channel on the WX Band, press the MENU button and the
display will show the current WX Band channel setting. While on WX
L L \M M
Band mode press the
buttons to select one of the 10 NOAA
WEATHER (WX) BAND channels.
To confirm, press the PTT button or press the MENU button to move
to the next feature setting.
To turn the NOAA WEATHER RADIO off, press the PTT button. The
current GMRS/FRS radio setting will be displayed and the
icon will
go off.
Page 11
midlandusa.com

Advertisement

Table of Contents
loading

Table of Contents