Power On/Off; Selecting The Active Channel; Transmitting And Receiving A Call - Midland Micro Mobile MXT105 Manual

Power On/Off

To turn the radio on and off:
1. With the radio off, press and hold the Power On/Off
seconds to turn the radio on.
▪
The LCD display will show all icons for one second and then display
the most recently selected channel.
2. With the radio on, press and hold the Power On/Off
seconds to turn the radio off.
▪
The LCD display will go blank when the radio turns off.

Selecting the Active Channel

IMPORTANT! To communicate between two MXT105 radios, both radios
must be set to the same channel and Privacy Code (see Selecting a
Privacy Code) selections.
To select the active channel:
1.
Be sure the radio is turned on (see Power On/Off)
2. Press the Channel Up
available channels. Press the Channel Down
backward through the available channels.
▪
The Channel icon on the LCD display will show the currently
selected channel.

Transmitting and Receiving a Call

IMPORTANT! To communicate between two MXT105 radios, both
radios must be set to the same channel (see Selecting a Privacy Code)
selections.
To transmit and receive a call:
1. Be sure the radio is turned on (see Power On/Off)
2. To transmit a call, press and hold the PTT button on the microphone,
and speak into the microphone in a normal voice.
NOTE: For maximum clarity, hold the microphone 2 to 3 inches from your
mouth when speaking.
Page 12
button to scroll forward through the
Model MXT105
button for two
button for two
button to scroll
midlandusa.com