Cleaning & Maintenance - Fetco Extractor TBS-21A User Manual

Brewer
Daily: Wipe the area above the brew basket to remove coffee and tea residue.
Daily or Weekly: The spray plate should be removed and cleaned to remove hard water deposits. In areas
with extremely hard water, it may be necessary to do this daily. Weekly cleaning may be sufficient in some
areas.
When cleaning the spray plate, make sure that each hole is completely free of mineral deposits. A
toothpick may be used for cleaning out the holes. Never use metal objects or abrasives on the spray
plate's Teflon coating.
Tea Dispenser
The dispenser liner should be cleaned and sanitized daily using a commercial tea dispenser
cleaner/sanitizer.
Do not scratch the plastic liner by using abrasive products or tools.
Never leave tea in the dispenser overnight.
1. Add the recommended amount of sanitizer for 3 gallons to the empty dispenser.
2. Brew a complete batch with water only into the dispenser and let the solution sit for the recommended
amount of time
3. Empty the dispenser through the faucet.
4. Lift the liner out of the dispenser and remove the faucet as shown below. Do not remove the spring from
the faucet shank.
5. Disassemble the faucet by unscrewing the nut below the handle.
6. Use the enclosed brush to clean out the faucet shank and the exposed surfaces of the faucet parts.
7. Thoroughly rinse the liner, faucet parts, and dispenser cover with warm water.
8. Re-assemble the faucet, attach it to the liner, and place it into the dispenser body.
9. Wipe the stainless steel body with a damp cloth.
Cleaning & Maintenance
To remove the faucet:
Push in against spring
Rotate 180°
Pull out
To attach the faucet, hold it upside-down,
push it on to the faucet shank, and rotate
it to the upright position. The spring will
lock the faucet in place.
11