Charging The Battery - Panasonic DMC-TZ70 Operating Instructions For Advanced Features

Preparations

Charging the battery

We recommend charging in a location where the ambient temperature is between 10 °C
and 30 °C (50 °F to 86 °F) (same for the battery temperature).
Make sure that the camera is turned off.
When charging the camera, connect the USB connection cable (supplied) to the
[AV OUT/DIGITAL] socket.
[AV OUT/DIGITAL] socket
• This terminal is located at the
bottom when the camera is in an
upright position.
• Always check the direction of the pins and hold the plug straight to insert or remove it.
(If the cable is inserted in the wrong direction, the pins could become deformed and cause faulty
operation.)
Also, do not insert into the wrong socket. Doing so may cause damage to this unit.
■
Charging the battery by connecting the camera to the electrical outlet
Connect the AC adaptor (supplied) and the camera using the USB connection cable
(supplied), and plug the AC adaptor into the electrical outlet.
■
Charging the battery through the computer
Connect the camera to the USB connector of a computer using the USB connection
cable (supplied).
USB connection
cable (supplied)
- 19 -
AC adaptor (supplied)
Insert the USB connection cable
so that its [
[ ] mark side of the camera.
Charging battery
Computer
Getting ready:
Turn on the computer.
] mark will face the
SQW0206