D-Link DSL-2750U User Manual page 36

Section 3 – Web Configuration
Advanced Settings
Choose ADVANCED > Advanced Wireless > Advanced Settings. The page
shown in the right figure appears. In this page, you can configure guest wireless
networks.
Wireless Network Name (SSID): The Wireless Network Name is a unique name
that identifies a network. All devices on a network must share the same wireless
network name in order to communicate on the network. If you decide to change
the wireless network name from the default setting, enter your new wireless
network name in this field.
The router supports multiple SSID. Multiple WLAN SSIDs realizes multiple
wireless access points on a single wireless router. Wireless clients being
connected to different SSIDs can avoid mutual interference. This function is
applied to small office or house joint rent users. For example, 4 departments of a
small office are sharing the wireless network of a wireless router, while each
department wants to have its own individual WLAN. Multiple WLAN SSIDs
function can realize this application.
The settings in this page are only for more technically advanced users who have
sufficient knowledge about wireless LAN. Do not change these settings unless
you know the effect of changes on the device.
Click Apply to save the settings.
Note:
If you want to know more about the parameters of Advanced Wireless
Settings, refer to HELP index.
MAC Filtering
Choose ADVANCED > Advanced Wireless > MAC Filtering. The page shown
in the right figure appears. This page is used to permit or block access to this
router from host with MAC address contained in the MAC Address table.
Step 1 Select WLAN MAC Filtering Global Policy.
- BLACK_LIST: Allow all packets but DENY MAC addresses that
match a rule in the list.
- WHITE_LIST: Deny all packets but ALLOW MAC addresses that
D-Link DSL-2750U User Manual
34