Fujitsu CELVIN NAS QE705 Operating Manual

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Operating Manual

System

CELVIN® NAS

Table of Contents

Summary of Contents for Fujitsu CELVIN NAS QE705

Page 1 Operating Manual System CELVIN® NAS...
Page 2 For driver updates, please go to: http://support.ts.fujitsu.com/download Should you have any technical questions, please contact: ● our Hotline/Service Desk (see Service Desk list or visit: http://support.ts.fujitsu.com/contact/servicedesk) ● your sales partner ● your sales office We hope you enjoy working with your new Fujitsu system!
Page 4 Published by / Contact address in the EU Fujitsu Technology Solutions GmbH Mies-van-der-Rohe-Straße 8 80807 Munich, Germany http://www.fujitsu.com/fts/ Copyright © Fujitsu Technology Solutions GmbH 2016. All rights reserved. Publication Date 03/2016 Order No.: A26341-F103-Z325-1-7619, edition 1...
Page 5: Table Of Contents
CELVIN® NAS Operating Manual Your CELVIN® NAS… Installing the NAS Connecting to the NAS Copying data using the front USB port Web Server FTP server Using the synchronisation software Qsync Using the QGet download software NetBak Replicator Surveillance station Firmware update NAS maintenance Troubleshooting RAID operation errors Technical data...
Page 6 Trademarks Fujitsu and the Fujitsu logo are registered trademarks of Fujitsu Limited or its subsidiaries in the United States and other countries. Microsoft and Windows are trademarks or registered trademarks of the Microsoft Corporation in the United States and/or other countries.
Page 7 Add files and view the synchronisation result on the NAS ............39 Control synchronisation process ....................39 Information on synchronisation and sharing................39 Manage or track Qsync status via web browser................. 40 Using the QGet download software....................41 NetBak Replicator..........................43 Installing NetBak Replicator ....................... 43 Fujitsu...
Page 8 Contents Using NetBak Replicator ........................44 Surveillance station ..........................45 Firmware update ..........................50 Updating the system firmware using Fujitsu Finder ..............51 NAS maintenance..........................52 Shutting down/rebooting the server ....................52 Resetting the administrator password and network settings...............53 Failure or malfunction of a hard disk ....................54 Power failure or abnormal shutdown....................54...
Page 9: Your Celvin® Nas
(model with 2 hard disks) or QE805 (model with 4 hard disks). Back up your system regularly to avoid any potential data loss. Fujitsu Technology Solutions will not accept responsibility for the loss of or the recovery of any data in any form.
Page 10: Notational Conventions
"This font" indicates  cross-references to another section, e.g. "Safety information"  Names of CDs, DVDs and titles or designations for other materials, e.g.: "Quick Start Guide" or "Safety/Regulations" manual indicates a key on the keyboard, e.g: F10 Fujitsu...
Page 11: Safety Notes
The shipped version of this device complies with the requirements of EU directives 2004/108/EC "Electromagnetic compatibility", 2006/95/EC "Low voltage directive", 2011/65/EC "RoHS directive" and 2009/125/EC "ecodesign directive" from 20 April 2016: 2014/30/EC "Electromagnetic Compatibility" and 2014/35/EC "Low Voltage Directive"). Fujitsu...
Page 12: Fcc Compliance Statement
● Consult the dealer or an experienced radio/TV technician for help. Fujitsu not responsible for any radio or television interference caused by unauthorized modifications of this equipment or the substitution or attachment of connecting cables and equipment other than those specified by Fujitsu. The correction of interferences caused by such unauthorized modification, substitution or attachment will be the responsibility of the user.
Page 13: Hardware Overview
Your CELVIN® NAS… Hardware overview ® CELVIN NAS QE705 Front STATUS HDD1 HDD2 LED indicators: Status, LAN, USB LED indicators: HDD 1-2 On/Off switch One Touch Copy button USB 3.0 Fujitsu...
Page 14 Your CELVIN® NAS… Rear Kensington security slot Reset button for password and network settings 2 x Gigabit LAN 2 x USB 3.0 1 x eSATA Power supply Fujitsu...
Page 15: Celvin ® Nas Qe805
Your CELVIN® NAS… ® CELVIN NAS QE805 Front STATUS HDD1 HDD2 HDD3 HDD4 LED indicators: Status, USB, LAN LED indicators: HDD 1-4 On/Off switch One Touch Copy button USB 3.0 Fujitsu...
Page 16 Your CELVIN® NAS… Rear Kensington security slot Reset button for password and network settings 2 x Gigabit LAN 2 x USB 3.0 1x eSATA Power supply Fujitsu...
Page 17: Installing The Nas
This product will work with 2,5/3,5 inch SATA hard disks from major hard disk manufacturers. A list of compatible drives can be found at http://support.ts.fujitsu.com. Fujitsu Technology Solutions will accept no liability whatsoever for any product defects/faulty operation, and/or any time and costs associated with data loss/data recovery, insofar as the cause can be attributed to misuse or improper installation of hard disks, regardless of the circumstances or for whatever reason.
Page 18: System Status Checks
NAS is connected to the network and the power supply. ® The following illustration shows the CELVIN NAS QE805. STATUS HDD1 HDD2 HDD3 HDD4 System-Status HDD 1 - 2 (QE705) HDD 1 - 4 (QE805) Fujitsu...
Page 19 The NAS is being accessed from the network. The disk data is being accessed and a read/write Flashes red error occurs during the process. A hard drive read/write error occurs. Green The disk data is being accessed. Flashes green The hard drive can be accessed. Green Fujitsu...
Page 20 An attempt is being made to copy NAS data to an external storage device connected to the front USB port, but the data cannot be copied. Short beep (0.5 sec) 3, every 5 min. The system fan is out of function. Long beep (1.5 sec) Fujitsu...
Page 21: Configuring Software Settings
Select the appropriate NAS model to continue. ► Click on Search. Displays the available programs. ► To start the installation, click on the corresponding symbol in Fujitsu Finder. ► Follow the on-screen instructions to install Fujitsu Finder. Fujitsu Finder will then run automatically. Fujitsu...
Page 22 If you are using Windows 7/8/10, the following window will be displayed: ► Set a checkmark against Private networks, such as my home or work network. ► Click on Allow access. Fujitsu Finder detects the NAS on the network and if necessary asks whether Quick Setup should be run. Fujitsu...
Page 23 Note that during NAS set up, the installed hard disk will be formatted and all the data on it will be lost. ► Follow the instructions for initial configuration. The configuration process may take up to twenty minutes if the hard disk used has a capacity larger than 1 TB. Fujitsu...
Page 24 To create a RAID 1 array, a minimum of 2 hard drives are required. The storage capacity of a RAID 1 disk volume is equal to the size of the smallest hard drive. Fujitsu...
Page 25 (size of the smallest capacity disk in the array) N/2. N is the number of hard drives in the volume. RAID 10 tolerates failure of only two disks from two different sets of disks. ► Click on Next and then on Start Installation. Fujitsu...
Page 26: Connecting A Network Drive
Installing the NAS Connecting a network drive ► Start Fujitsu Finder. ► Open the menu Tools - Map Network Drive. The NAS offers several standard network shares. ► Select the network share that should be mapped as a network drive and click onNetwork Share.
Page 27 Installing the NAS ► Select the drive letter to be used for the connection and click on Finish. Fujitsu...
Page 28 Installing the NAS ► Once a connection has been successfully established, the network share will become available for use as a local data carrier in Windows Explorer. Fujitsu...
Page 29: Connecting To The Nas
Enter \\[NAS name] or \\[NAS IP] to access the shared folders on the NAS. The placeholders [NAS name] and [NAS IP] represent the name or IP address of your NAS. You can use the Fujitsu Finder to obtain this information. Fujitsu...
Page 30 Connecting to the NAS ► Please enter your user name and password. – Default user name: admin – Default password: admin Files can be uploaded to the network shares. Fujitsu...
Page 31: Administering The Nas Via A Web Browser Under Windows
The default NAS IP is 169.254.100.100:8080. If the NAS has been configured to use DHCP, then the Fujitsu Finder can be used to check the IP address of the NAS. Make sure that the NAS is connected to the same subnet as the computer that is running Fujitsu Finder.
Page 32: Administration User Interface
6 = Background tasks 14 = Display 7 = External devices 15 = Next desktop 8 = Messages and warnings 16 = Control centre To display the administration user interface, a screen resolution of at least 1024 x 768 is recommended. Fujitsu...
Page 33: Opening The Main Menu
Connecting to the NAS Opening the main menu ► Click on The main menu will appear. The main menu consists of three parts: Applications The sub-items enable access to NAS extensions that are provided and maintained by QNAP Systems, Inc. Fujitsu...
Page 34: Control Panel / Opening Applications
QNAP Systems, Inc. These applications can be installed via the App Center. Please understand that Fujitsu cannot be held liable for the content, functionality and security of these applications in any way. In the event of problems with these applications, please contact the relevant developer directly.
Page 35: Accessing The Nas From Linux
"public" should be created in the /mnt/pub directory, use the following command: mount -t nfs 169.254.100.100 :/public /mnt/pub The above command can only be executed when logged in as "root". ► Log in with the user name specified previously. The network share folder can be accessed via the mounted directory. Fujitsu...
Page 36: Copying Data Using The Front Usb Port
Connect the USB drive (e.g. digital camera or flash drive) to the front USB port on the NAS. ► Press the one-touch copy button. Data will be copied to the NAS according to the previously defined settings. QE705 STATUS HDD1 HDD2 One-touch copy button USB 3.0 Fujitsu...
Page 37 2, etc. If the source storage device only contains one partition, the backup folder is simply named YYYYMMDD. Files are copied from the source to the target. Extra files at the target are deleted; files with the same name are overwritten by the source. The source data remains unchanged. Fujitsu...
Page 38: Web Server
Click the http://[NAS IP]/ link on the Web Server page to access the web pages that were uploaded. Note that when Web Server is enabled, it is necessary to type http://[NAS IP:8080] into the web browser to access the login page for the NAS. Fujitsu...
Page 39: Mysql Administration
Please follow the steps below or refer to the INSTALL file in the SQLiteManager-*.tar.gz download to install SQLiteManager. ► Extract the SQLiteManager-*.tar.gz download file. ► Upload the extracted SQLiteManager-* folder to \\[NAS IP]\Web\. ► Open a web browser and go to http://[NAS IP]/SQLiteManager-*/. The "*" symbol refers to the version number of SQLiteManager. Fujitsu...
Page 40: Ftp Server
The NAS supports the FTP service. To use the FTP service, enable this function in Network Services and follow the steps below: ► Open Internet Explorer and enter ftp://[NAS IP] or ftp://[NAS Name]. It is essential that secure passwords are used when using the FTP server. A secure password contains numbers, letters and special characters. Fujitsu...
Page 41: Using The Synchronisation Software Qsync
Install Qsync utility The Qsync utility synchronises all selected data on your computers and mobile devices. Installation on computers: ► Install the Qsync utility with the product CD. ► Download the Qsync utility from the Fujitsu website at http://www.fujitsu.com/fts/download Fujitsu...
Page 42: Log On At Nas
The files are copied to your other devices which you use Qsync with. This means that you no longer have to copy files between your computer and external devices. Furthermore, the size of files as email attachments is no longer problematic. Fujitsu...
Page 43: Synchronisation
Click on Send if you would like to send the link via email or copy the link. ► Click on Settings, to set further options for the link such as expiry date, password or the creation of an SSL link. Fujitsu...
Page 44: Share Folder With A Group
All group members receive an invitation to file sharing. Once they have accepted, group members can access the folder. The folder only becomes a team folder after the invitations have been accepted. Team folder users cannot share their access further. Fujitsu...
Page 45: Synchronisation Manager
The following lists provide you with information on synchronisation and sharing: ● Sharing & file update centre: – Sharing centre: List of shared folders and files – File update centre: List of file and folder update log files ● Recently modified files: – List of recently modified files Fujitsu...
Page 46: Manage Or Track Qsync Status Via Web Browser
Name of the device as a Qsync-File Station Event Logs List of user details ̶ Team folder List of team folder ̶ status Including shared folders and folders shared by other users Share file List via the status of ̶ sharing links Fujitsu...
Page 47: Using The Qget Download Software
QGet on any Windows computer to manage the download tasks for all NASs in one place. ► To use QGet, install the software from the product CD-ROM. ► Follow the instructions to install QGet. ► Run QGet from the installed location. Fujitsu...
Page 48 Using the QGet download software For details on using QGet, please refer to the online help included with the software. Fujitsu...
Page 49: Netbak Replicator
Select Install NetBak Replicator from the menu on the NAS CD. ► Follow the on screen instructions to install the application. ► A shortcut icon will appear on the desktop upon successful completion of the installation process. Double click on this icon to launch NetBak Replicator. Fujitsu...
Page 50: Using Netbak Replicator
► Launch NetBak Replicator. ► For details on how to use the software, press F1 . Fujitsu...
Page 51: Surveillance Station
NAS is connected to the internet. ► Activate the function under Control Panel - Apps - Station Manager. You can find a list of compatible IP cameras at http://www.fujitsu.com/fts/support/manuals. Prepare IP camera ► Create a plan of your home or office network before starting the surveillance system set-up.
Page 52 Router IP: 192.168.1.100 ► You can find out the IP address of your camera with Fujitsu Finder. Fujitsu Finder can be installed from the product CD which is enclosed with your NAS. A description of this is contained in the instructions.
Page 53 If you are accessing this page for the first time with a web browser, you must install additional plug-ins to display the image. You can now use the Surveillance Station monitoring and recording functions. Further information e.g. on motion detection recording, schedule recording and video playback can be found in the software's online help. Fujitsu...
Page 54 The licences for every further channel can be obtained from the QNAP® License Store at http://www.license.qnap.com Fujitsu does not have any influence on the content of the QNAP® License Store. For this reason, the processes described in the following are only exemplary and may have since changed.
Page 55 As soon as you have activated the PAK with your NAS, the PAK is connected with the hardware identification (UDI) of your NAS. You can then no longer use the same PAK for a different NAS. If you have any problems related to the camera licenses or PAK, please contact QNAP® License Store Support: https://license.qnap.com/ContactUs.html Fujitsu...
Page 56: Firmware Update
Before updating the system firmware, make sure the product model and firmware version are correct. Follow the steps below to update the firmware: ► Please visit http://www.fujitsu.com/fts/support and read the release notes for the new firmware version to check if it is necessary to update the firmware. ►...
Page 57: Updating The System Firmware Using Fujitsu Finder
► Click Start to update the system. Fujitsu Finder can be used to update all servers of the same model on the same local network. Please note that this process requires administrator access to all the servers to be updated.
Page 58: Nas Maintenance
To force a shutdown of the server, press and hold down the ON/OFF button for at least 10 seconds. The server will beep once and then shut down immediately. The Fujitsu Finder can be used to restart or shut down the server (admin access required). Fujitsu...
Page 59: Resetting The Administrator Password And Network Settings
Default user name: admin – Password: admin The Enable configuration reset switch option must be enabled in Control Panel - System Settings - Hardware in order to allow the system to be reset to defaults using the reset button. Fujitsu...
Page 60: Failure Or Malfunction Of A Hard Disk
If the system restarts continuously, it may fail to resume normal operation. Please contact technical support immediately in such cases. System temperature protection When the system temperature exceeds 70 °C (158 °F), the system will shut down automatically to protect the hardware. Fujitsu...
Page 61: Eup Mode Configuration (For Compliance With Legal Standby Requirements)
If EuP mode is deactivated, the power consumption of the server is greater than 0.5W when switched off. EuP is disabled by default so that you can use the functions Wake on LAN, AC power resumption, and power schedule settings properly. Fujitsu...
Page 62: Troubleshooting Raid Operation Errors
Install a new drive in the NAS to replace the faulty drive. Finally, run the RAID 1 migration. When connecting or removing a hard disk, please adhere strictly to the following rules to avoid causing a system operation fault or loss of data. Fujitsu...
Page 63: Hot-Swap Hard Drives
The next hard disk can then be connected/disconnected. Hot-swap Hard Drives Fujitsu Technology Solutions disclaims any responsibility for product damage/malfunction or data loss/recovery due to misuse or improper installation of hard disks in any occasions for any reasons.
Page 64: Raid Recovery
After recovering a RAID 1, RAID 5, or RAID 6 disk volume from not active to degraded mode by the RAID recovery, users can read or write the volume normally. The volume status will be recovered to normal after synchronization. If the disconnected drive member is damaged, the RAID recovery function will not work. Fujitsu...
Page 65 N-2 failed hard drive and any of N-3 and any of the remaining the remaining hard drives hard drives cannot be spun up cannot be spun up or identified or identified or accessed. or accessed. N = Number of hard disk drives in the array Fujitsu...
Page 66: Technical Data
1 x low-noise fan for hard disks and circuit board Accessories Accessories box Power supply and power cable CD-ROM 1 x 1.8 m Ethernet cable Quick installation guide "Quick Start Guide" Safety notes Screws for 2.5" hard disks Screws for 3.5" hard disks Fujitsu...
Page 67: Gnu General Public License
To prevent this, the GPL assures that patents cannot be used to render the program non-free. The precise terms and conditions for copying, distribution and modification follow. Fujitsu...
Page 68 Fujitsu...
Page 69 The work must carry prominent notices stating that you modified it, and giving a relevant date.  b) The work must carry prominent notices stating that it is released under this License and any conditions added under section 7. This requirement modifies the requirement in section 4 to “keep intact all notices”. Fujitsu...
Page 70 Corresponding Source of the work are being offered to the general public at no charge under subsection 6d. A separable portion of the object code, whose source code is excluded from the Corresponding Source as a System Library, need not be included in conveying the object code work. Fujitsu...
Page 71 Disclaiming warranty or limiting liability differently from the terms of sections 15 and 16 of this License; or  b) Requiring preservation of specified reasonable legal notices or author attributions in that material or in the Appropriate Legal Notices displayed by works containing it; or Fujitsu...
Page 72 Each time you convey a covered work, the recipient automatically receives a license from the original licensors, to run, modify and propagate that work, subject to this License. You are not responsible for enforcing compliance by third parties with this License. Fujitsu...
Page 73 (a) in connection with copies of the covered work conveyed by you (or copies made from those copies), or (b) primarily for and in connection with specific products or compilations that Fujitsu...
Page 74 IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU. SHOULD THE PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. Fujitsu...
Page 75 Program, unless a warranty or assumption of liability accompanies a copy of the Program in return for a fee. END OF TERMS AND CONDITIONS Fujitsu...

This manual is also suitable for:

Celvin nas qe805