Magnavox 55MV314X Owner's Manual page 35

Network settings assistant
Before you proceed to Connection test or other settings in Network
section, run the Network settings assistant to connect the TV to your
Network.
2
Use H I to select Network settings assistant then press OK.
Network settings assistant
Language
Manual network settings
Channels
Connection test
Preferences
Setting status
Network
Restore default settings Renderer name
Reset network settings
3
Press OK to select Start now.
Wireless setting
Select to use a wireless LAN to connect to the internet by a wireless
connection.
4
Use H I to select Wireless, then press OK.
This TV can be connected to your home
network.
Select your connection type.
Cancel
5
Use H I to select the desired setting, then press OK, and follow
the On-screen Instructions.
Select this setting if your router has a Wi-Fi
Protected Setup (WPS) button. Start scanning
for wireless networks on the TV after pressing
Simple Connect
the WPS button on your router. If connection
test fails, try Simple Connect again.
refer to the router's manual for more details.
Search for Wireless Networks automatically and
Scan select the Wireless Network name (SSID) from
the list. Wireless network setting L p. 35
Set up the connection to the Wireless LAN
Manual entry
Access Point (AP) (e.g. wireless router) manually
by entering the Wireless Network name (SSID).
* WPS (Simple Connect) cannot be used when the security protocol is
set to WEP. Change the Access Point's security mode from WEP to
WPA or WPA2 (recommended).
Wired setting
Select to use an Ethernet cable to connect to the internet by a wired
connection. Please purchase shielded Ethernet cables at your local store
and use it when you connect to Network equipment.
4
Use H I to select Wired, then press OK.
Connection test will start automatically. L p. 37
●
Start now
Network selection
Start now
Information
Magnavox TV
Start now
Wireless
Wired
If it fails then
*
Manual network settings
2
Use H I to select Manual network settings, then press OK.
Network settings assistant Network selection
Manual network settings Wireless network setting
Connection test IP configuration
Setting status Proxy configuration
Renderer name
Reset network settings
Network selection
3
Use H I to select Network selection, then press OK.
4
Use H I to select the desired setting, then press OK.
If you connect to an Ethernet cable, select Wired
Wired
to connect to the Internet.
If you have a router with WPS function, select
Wireless
Wireless to connect to the Internet.
Wireless network setting
This menu is displayed only when you set Wireless in Network
selection. In order to use a wireless network, you must set up a
connection to the AP (e.g. wireless router).
3
Use H I to select Wireless network setting, then press OK.
Auto
Search for wireless networks automatically and select the SSID from the
list.
4
Use H I to select Auto, then press OK.
5
The list of wireless networks will be displayed. Use H I to select
the appropriate the SSID, then press OK.
Auto
Router 1
Manually enter your SSID Router 2
Router 3
Router 4
If you select the SSID with
●
screen will appear. Enter the WEP
selected wireless network using H I J K, then press OK.
If you select the SSID has a WPS, the WPS setting screen will
●
appear. Use H I J K to select a setting, then press OK.
35
Wireless
Auto
IP setting mode
Proxy setting
Enter Key
Select
Enter Key
Select
, WEP / WPA / WPA2 Key entry
*2
/ WPA / WPA2 key of the
*2
Continued on next page.
.
English