Changing The Sd Memory Card - Fluke Ti32 User Manual

Changing the SD Memory Card

To eject an SD memory card from the Imager, press in on the exposed edge of
the SD memory card and then release. The card should pop partially out after
releasing it. Carefully pull the card out of the slot.
The SD memory card can be inserted and removed while the Imager
is in operation.
Do not remove the SD memory card while storing an
image. Image data may be lost.
To insert an SD memory card into the Imager, carefully slip the card into the
slot with the card's label facing toward the LCD as shown in Figure 3. Push
the card in until it catches.
Shop for Fluke products online at:
Note
 Caution
Figure 3. SD Memory Card Insertion
MyFlukeStore
www.
Thermal Imagers
Changing the SD Memory Card
Lock
1.877.766.5412
.com
exj03.eps
29