Table of Contents
Advertisement
setup screen
• E-mail configuration
- Server address : Enter the IP address of the e-mail server to send an event
image.
- Use authentication : Select whether to use authorization.
- Use SSL : Specify the use of SSL.
- ID : Enter the user ID for logging into the email server.
- Password : Enter the user account password for logging into the email server.
- Port : The default port of the email server is 25; however, you can use a different
port number according to the email server settings.
- Recipient : Enter the address of the email recipient.
- Sender : Enter the address of the email sender. If the sender address is
incorrect, the email from the sender may be classified as SPAM by the email
server and thus may not be sent.
- Subject : Enter a subject for your email.
- Body : Provide the text for the massage. Attach an event image to your email.
4. When done, click [apply (
Storage
You can activate recording on your device, set the recording conditions, check the saved
data capacity and format the device itself.
1. From the Setup menu, select the
<event (
2. Click <Storage>.
3. Select a device to save data in.
If your device is properly recording data, it
`
M
will display "Recording".
82_ setup screen
)> tab.
)].
Advertisement
Table of Contents
