Philips 65PUS9809 User Manual page 80

To activate the light sensor...
1 - Press  and click Eco Settings.
2 - Click Light Sensor. The icon  is shown in front of Light
Sensor when it is active.
Switch Off Timer
If the TV receives a TV signal but you don't press a key on the
remote control during a 4 hour period, the TV switches of
automatically to save energy. Also, if the TV does not receive a
TV signal nor a remote control command for 10 minutes, the
TV switches off automatically.
If you use the TV as a monitor or use a digital receiver to watch
TV (a Set-Top Box - STB) and you do not use the remote
control of the TV, you should deactivate this automatic switch
off.
To deactivate the Switch Off Timer ...
1 - Press  and click Eco Settings.
2 - Click Switch Off Timer. Click inside the slider bar to adjust
the value. The value 0 (Off) deactivates the automatic switch off.
The icon  is shown in front of Switch Off Timer when it is
active.
25.7
Accessibility
Switch On
With Accessibility switched on, the TV is prepared for use for
the deaf, hard of hearing, blind or partially sighted people.
Switch on
If you did not switch on Accessibility during the installation, you
can still switch it on in Setup.
To switch on Accessibility...
1 - Press  and press  (left) for Setup.
2 - Select Accessibility and select Accessibility one step further.
3 - Select On and press OK.
4 - Press  BACK repeatedly if necessary, to close the menu.
With Accessibility switched on, the option Accessibility is added
in the Options menu.
Key Beep
Key Beep gives an audio feedback each time you press a key on
the remote control. The volume of the beep is fixed.
To switch on Key Beep...
1 - While watching a TV channel, press  OPTIONS, select
Accessibility and press OK.
2 - Select Key Beep and select On.
If Accessibility does not appear in the Options menu, switch
on Accessibility in Setup.
For more information, press
up Accessibility.
Voice Guidance
What You Need
With Voice Guidance, your smartphone or tablet can speak text
that appears on the TV screen. It tells you what channel you
switched to or reads out the details of the next programme on
this channel. Voice Guidance speaks channel, programme and
TV Guide information.
Your smartphone or tablet must have a Text-To-Speech (TTS)
application installed. The TV must be linked up with the
smartphone or tablet in your home network.
With Voice Guidance switched on in Accessibility, the TV sends
out the TTS information to whatever smartphone or tablet
within the home network. If the TTS application on the mobile
device is switched on, the text will be converted to speech.
The TV will send out the TTS information in the language set for
the TV. The smartphone or tablet will speak out the text in that
language. The language set for the mobile device itself, can be
different.
Voice Guidance works with arrow navigation only.
Switch On
To switch on Voice Guidance...
1 - Press  and press  (left) for Setup.
2 - Select Accessibility > Voice Guidance.
3 - Select On and press OK.
4 - Press  BACK repeatedly if necessary, to close the menu.
All other settings, like which voice, voice speed or speech
volume are done in the mobile device TTS application.
Spoken Info and Text
The following info or text will be spoken...
• the channel name and number when switching channels
• starting time of the TV programme
• details of the current and next TV programme
• instructions for navigating with the arrows
• the Audio Desciption text if available
• the volume level when adjusting the volume
• the Options menu and its items
• navigating the Home menu
80

Keywords and look