Brother DCP-J515W Quick Setup Manual page 2

2
Load plain A4 paper
a
Pull the paper tray a completely out of the
machine.
b
Lift the output paper tray cover a.
1
2
c
1
d
e
DO NOT push the paper in too far.
f
With both hands, gently press and slide the
paper side guides a and then the paper length
guide b to fit the paper size.
Make sure that the triangular marks c on the
paper side guides a and paper length guide b
line up with the mark for the paper size you are
using.
3
Fan the stack of paper well to avoid paper jams
and misfeeds.
Gently put the paper into the paper tray print
side down and top edge first. Check that the
paper is flat in the tray.
IMPORTANT
Gently adjust the paper side guides to the
paper with both hands. Make sure that the
paper side guides touch the edges of the
paper.
1
3
2