Panel Descriptions - Roland FP-80 Owner's Manual

Panel Descriptions

Music Rest
Attach the included music rest as shown below.
[ ] Switch
Turns the power on
Page
and off.
Front Panel
Use these buttons and
sliders to control the FP-80.
Headphone Jack
Connect your headphones
(sold separately) here.
* To prevent malfunction and equipment failure, always turn down the volume, and turn off all the units before making any connections.
* When connection cables with resistors are used, the volume level of equipment connected to the INPUT jack may be low. If this happens, use
connection cables that do not contain resistors.
10
Insert into the holes
13
Page
USB MEMORY Port
You can use USB flash drives to do all of the following.
* Carefully insert the USB flash drives all the way in—until it is firmly in place.
* Use a USB flash drive sold by Roland. We cannot guarantee operation if any other
USB flash drive is used.
Rear side
6
USB COMPUTER Port
You can use commercially available USB cable to connect the FP-80 to your
computer. You can then use MIDI-related software to record and play back
FP-80 performances.
• Play WAV files and standard MIDI files
(SMF files) copied from your computer.
• Make audio recordings of your FP-80
performances.
• Play these audio recordings at your
computer, or burn them to CDs or other
media.
• Save/load registration sets.
• By connecting a wireless USB adapter
(WNA1100-RL; sold separately), you can
use wireless-connectivity applications,
such as Air Recorder for iPhone.
DC IN Jack
Connect the included AC adaptor
here.
Place the AC adaptor so the
side with the indicator (see
illustration) faces upwards
and the side with textual
information faces downwards.
The indicator will light when
you plug the AC adaptor into
an AC outlet.
23
Page
27
Page
30
Page
37
Page
50
Page