www.seagate.com
2.2
Formatted capacity
Model
ST5000AS0011 and
ST5000AS0001
*One GB equals one billion bytes and 1TB equals one trillion bytes when referring to hard drive capacity. Accessible capacity may vary depending
on operating environment and formatting.
2.2.1
LBA mode
When addressing these drives in LBA mode, all blocks (sectors) are consecutively numbered from 0 to n–1, where
n is the number of guaranteed sectors as defined above.
See Section 5.3.1, "Identify Device command" (words 60-61 and 100-103) for additional information about 48-bit
addressing support of drives with capacities over 137GB.
2.3 Recording and interface technology
Interface
Recording method
Recording density, KFCI (max)
Track density, KTPI (ktracks/in avg)
2
Areal density (Gb/in
avg)
Spindle speed (RPM) (± 0.2%)
Internal data transfer rate (Mb/s max)
Sustained data transfer rate, OD read (MB/s max)
Average data rate, read/write (MB/s)
I/O data-transfer rate (MB/s max)
2.4
Physical characteristics
Height (max)
Width (max)
Length (max)
Weight: (maximum)
Cache buffer
Seagate Archive HDD Product Manual, Rev. D
Formatted capacity*
5TB
26.11mm / 1.028 in
101.85mm / 4.010 in
147.00mm / 5.787 in
655g (1.44 lb)
128MB (129,536KB)
Guaranteed sectors
9,767,541,168
Serial ATA (SATA)
Perpendicular
1807
455
826
5900
1813
180
146
600 (Ultra DMA mode 5)
Bytes per sector
4096
(512 byte emulation)
5