Advertisement
REMOTE CONTROL
Maximum distances: 8m
Press the remote control's button
TO TURN ON OR OFF THE UNIT
1
• Please be aware of the OFF indication on the remote
control display to prevent the unit from starting/stopping
improperly.
TO SET TEMPERATURE
2
• For heat, cool and dry modes, the range of temperature
for selection is 16˚C ~ 30˚C.
• Operating the unit within the recommended temperature
could induce energy saving.
HEAT mode : 20˚C ~ 24˚C.
COOL mode : 26˚C ~ 28˚C.
DRY mode : 1˚C ~ 2˚C lower than room temperature.
TO SELECT OPERATION MODE
3
AUTO mode - For your convenience
• Unit selects the operation mode according to the room
temperature.
• Once auto mode is selected, the unit will operate at the
standard setting temperature.
Room
temperature
23˚C & above
Below 23˚C
Below 20˚C
• Press
for "HI" to +2˚C or
standard setting temperature.
HEAT mode - To enjoy warm air
• Unit takes a while to warm up. The power indicator blinks
during this operation.
COOL mode - To enjoy cool air
• Use curtains to screen off sunlight and outdoor heat to
reduce power consumption during cool mode.
DRY mode - To dehumidify the environment
• Unit operates at low fan speed to give a gentle cooling
operation.
18
INDICATOR
(Green)
POWER
(Orange)
TIMER
Standard setting
Operation mode
temperature
Cool
25˚C
Dry
22˚C
Heat
21˚C
for "LO" to -2˚C to the
TO SELECT FAN SPEED (3 OPTIONS)
4
FAN SPEED
• For AUTO, the indoor fan speed is automatically adjusted
according to the operation mode.
TO ADJUST VERTICAL AIRFLOW DIRECTION
5
(5 OPTIONS)
AIR SWING
• Keeps the room ventilated.
• In COOL/DRY mode, if AUTO is set, the louver swing
up/down automatically.
• In HEAT mode, if AUTO is set, the louver fi x at
predetermined position.
Press and hold for 5 seconds to dim or restore the
6
unit's indicator brightness.
Press and hold for approximately 10 seconds to
7
show temperature setting in °C or °F.
Press to restore the remote control's default setting.
8
Not used in normal operations.
9
3
2
6
7
9
Remote Control display
1
4
5
8
Advertisement
