Wds With Ap Mode - D-Link DAP-1353 User Manual

Section 3 - Configuration
In WDS with AP mode, the DAP-1353 wirelessly connects
multiple networks while still functioning as a wireless AP.
2.4GHz.
Wireless Band:
Mode:
WDS with AP mode is selected from the pull-down
menu.
Network Name
(SSID):
factory default setting is dlink
changed to connect to an existing wireless network or to
SSID Visibility: Enable or Disable
Auto Channel
Selection:
feature is not supported in WDS with AP mode. The
channel selection process only occurs when the AP is
Channel:
All devices on the network must share the same channel. To change the channel, use the pull-down menu to make the
Allows you to select the channel width you would like to operate in. Select 20 MHz if you are not using any 802.11n wireless
Channel Width:
clients. Auto 20/40 MHz
D-Link DAP-1353 User Manual

WDS with AP mode

18