Alarm 1 Menu; Figure 3.5 Flow Chart For Alarm 1 Menu - Omega i Series User Manual

3.2.7 Alarm 1 Menu

This unit is equipped with two physical outputs that can only be configured as
follows: Alarm 1 & Alarm 2, Alarm 1 & Output 2, Output 1 & Alarm 2, Output 1
& Output 2, Analog Out 1 & Alarm 2, Analog Out 1 & Output 2. Analog Out
available only if Analog Output Option board is factory installed.
If Analog Output Option is installed, the controller will skip Alarm 1 Menu
item to Analog Output.
Alarm must be DISABLED if Ramp is ENABLED.
ENTER ALARM 1 MENU:
Press a
Press d
Press a
Press d

Figure 3.5 Flow Chart for Alarm 1 Menu

1) Press a, if necessary, until CNFG prompt appears.
2) Display advances to INPT Input Menu.
3) Press a, if necessary, until Display advances to ALR1 Alarm 1
Menu.
4) Display advances to Alarm 1 ENBL Enable or DSBL Disable
Submenu and flashes the previous selection.
26