Table of Contents
Advertisement
Getting started
Battery installation and charging
CHARGE light
After you install your telephone or power returns following a power
outage, the handset will prompt you to set the date and time. For
instructions, see Set date/time in the telephone system's user's
manual for details. To skip setting the date and time, press
CAnCEl.
OFF/
ImPORTAnT InFORmATIOn
1. Use only the supplied rechargeable battery or replacement battery
(model BT162342/BT262342). To order, visit our website at
www.telephones.att.com
In Canada, dial
2. If you do not use the handset for a long time, disconnect and remove
the battery to prevent possible leakage.
To replace the battery, press the tab and slide
the battery compartment cover downwards.
Lift out the old battery and disconnect it from
the handset. Follow the instructions to install
and charge the new battery.
1 (866) 288-4268
3. Charge the handset by
placing it face up in the
telephone base or charger.
The CHARGE light is on
when charging.
1 (800) 222-3111
or call
.
8
.
Advertisement
Table of Contents
