Customising The Wash Cycles - Fisher & Paykel WA75T65GW1 Installation Instructions And User Manual

Clothes washer
Hide thumbs Also See for WA75T65GW1:
Table of Contents

Advertisement

Customising the wash cycles

18
To customise a cycle
EXCELLENCE model only
You can program your Smart Drive™ to remember the wash options you prefer for each wash
cycle. For instance, you may want to set the REGULAR cycle to a COLD wash or set HEAVY DUTY
to include a SOAK.
Press POWER.
1
Press the wash cycle button. Hold down for 2 seconds.
2
You will hear 2 quick beeps and the wash cycle light will flash.
Select your wash options (eg COLD wash, SOAK).
3
Press the wash cycle again to store your customised cycle.
4
To change your customised wash cycle simply repeat these steps.
When you are customising a wash cycle you can shorten or lengthen the agitation time.
To shorten the agitation time, press the ADVANCE button to reduce the number of wash
progress lights.
To increase the agitation time keep pressing the ADVANCE button until all the wash progress
lights are on (see page 12).
Note: unlike the FAVOURITE cycle you cannot customise a wash cycle to start at the RINSE or
SPIN stage. On HEAVY DUTY and HAND WASH you can only decrease the wash time.
Fig.22 Customising a wash cycle

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wa65t60gw1Wa55t56gw1Wa65t60mw1Wa55t56mw1

Table of Contents