Asus Z97-K R2.0 User Manual page 67

2.6.4 System Agent Configuration
Vt-d [Enabled]
Allows you to enable the virtualization technology fundtion on the memory controller hub
(MCH). Configuration options: [Enabled] [Disabled]
CPU Display Audio [Enabled]
Enable this item to support CPU display audio output. Configuration options: [Enabled]
[Disabled]
DVI Port Audio [Off]
Enable this item to support audio output for certain DVI monitors. Configuration options: [On]
[Off]
Graphics Configuration
Allows you to select a primary display from CPU, PCIE and PCI graphical devices.
Primary Display [Auto]
Allows you to select the primary display from CPU, PCIE and PCI graphics devices.
Configuration options: [Auto] [CPU Graphics] [PCIE] [PCI]
CPU Graphics Memory [Auto]
Allows you to set the system memory size allocated to DVMT 5.0 used by the CPU
graphics. Configuration options: [Auto] [32MB] [64MB] [96MB] [128MB] ~ [448MB]
[480MB] [512MB]
Render Standby [Auto]
This item allows you to enable Intel
power use when the system is idle. Configuration options: [Auto] [Disabled] [Enabled]
CPU Graphics Multi-Monitor [Disabled]
This item allows you to empower both integrated and discrete graphics devices for the
multi‑monitor output. The CPU graphics shared system memory size is fixed at 64 MB.
Configuration options: [Disabled] [Enabled]
DMI Configuration
This item allows you to control various DMI (direct media interface) to run at PCI‑E 2.0 speed.
DMI Gen 2 [Enabled]
Set this item to [Enabled] to run DMI at PCI‑E 2.0 speed. Configuration options:
[Enabled] [Disabled]
NB PCI-E Configuration
Allows you to configure the NB PCI Express settings.
PCIEx16_1 Link Speed [Auto]
Allows you to configure the PCIEx16 speed for slot 1. Configuration options: [Auto]
[Gen1] [Gen2] [Gen3]
Memory Configuration
Allows you to configure the memory configuration parameters.
ASUS Z97-K R2.0
Graphics Render Standby support to reduce iGPU
®
2‑35