Siemens Gigaset A100 Operating Manual page 8

Putting the telephone into service
First of all, assemble the correct phone cord for your con-
nection using the cord and jack set provided.
Step 1: Connecting the base station
Connect your base station to the telephone jack and the
mains supply.
220 V/
230 V
• Insert the round plug of the mains cable into the jack.
• Lay the cable in the channel provided (to prevent over-
tensioning).
• Plug the power supply unit into the power socket.
• Plug the square connector of the phone cable supplied
into the jack.
• Lay the cable in the channel.
• Plug the phone connector into the phone socket.
* Appearance may differ, depending on country!
If you do not want to use the telephone cable supplied,
ensure that you use either a simple extension cable or a
telephone cable with 3/4 connector assignment, otherwise
your Gigaset A100 will not function correctly.
1 free
2 free
3 L a
4 L b
5 free
6 free
4
Telephone
jack*