JVC GZ-HD320 Manual Book page 70

Troubleshooting
Trouble
Recording cannot be
performed.
Vertical lines appear on
recorded images.
Recording stops by
itself.
The recorded subject is
too dark.
The recorded subject is
too bright.
Digital zoom does not
work.
The focus is not
adjusted automatically.
The color looks strange.
(Too bluish, too reddish,
etc)
White balance setting
cannot be activated.
The continuous shooting
speed is slow.
Band of bright light
appears on the LCD
monitor.
Mosaic-type noise
occurs when recording
scenes with fast
moving or with extreme
changing in brightness.
0
EN
(Continued)
•
Slide the mode switch to select the desired mode (
•
Such a phenomenon occurs when shooting a subject illuminated
by bright light. This is not a malfunction.
•
If the camcorder temperature increases, REC flashes in the LCD
monitor and recording stops automatically to protect the HDD.
Turn off the camcorder, wait for a while, and start recording again.
•
Move away from a place where the camcorder is affected by
excessive sound or vibration (such as a concert hall).
•
A malfunction may occur in the HDD of the camcorder. In this
case, record to a microSD card.
•
Insert a commercially available microSD card, and set each of
the [REC MEDIA FOR VIDEO] and [REC MEDIA FOR IMAGE] to
[SD].
•
Recording stops automatically after 12 hours of continuous
recording.
•
Use backlight compensation.
•
Set [GAIN UP] to [AGC] or [AUTO].
•
Use [NIGHT] from scene select.
•
Set the brightness to the [+] side.
•
Set the backlight compensation to [OFF] if it is being used.
Set the brightness to the [–] side.
•
Change [ZOOM] to [80X / DIGITAL] or [200X / DIGITAL].
•
Digital zoom is not available in the still image recording mode.
•
Wipe the lens with lens cleaning cloth.
•
If you are recording in a dark place or a subject that has no
contrast between dark and light, adjust the focus manually.
•
Set [WB] in [MANUAL SETTING] appropriately to the light source.
•
Select [MWB] in [WB] while holding a sheet of plain white paper
in front of the camcorder so that the white paper fills the screen.
Keep touching OK until the
•
This cannot be used if [SEPIA] or [MONOTONE] are selected as
effects.
•
Do not use [TWILIGHT] from scene select.
•
The continuous shooting speed will drop after continuous shots.
•
Continuous shooting speed may drop depending on the recording
media or under certain recording conditions.
•
This occurs when there is a bright light source near the
camcorder. This is not a malfunction. Change the direction of the
camcorder to prevent the light source comes into view.
•
Record videos with high quality mode, such as UXP or XP mode.
Action
B
indicator appears.
! #
or ).