Cobra microTALK CXT345 Owner's Manual page 9

Mode Functions
Operation
Five Call Tone Settings
You can choose between five different Call Tone Settings to transmit
a call alert.
To change a call tone setting:
Mode/Power
1. Press the Mode/Power button until the
letter "C" and the current call tone number
(01 through 05) is displayed. The current
call tone will sound for one second.
Call Tone Setting
2. Press the Channel Up or Channel Down button
to hear the other call tone settings.
3. Choose one of the following:
a. Press the Mode/Power button to
enter the new setting and proceed
Channel Button
to other functions.
b. Press the Lock button to enter the new setting
and return to Standby mode.
Roger Beep Confirmation Tone
Your listener will hear an audible tone when you release the
Talk button. This alerts the other party that you are finished
talking and it is OK for them to speak.
To turn roger beep on or off:
Mode/Power
1. Press the Mode/Power button until the
Roger Beep icon flashes. The current
on or off setting is displayed.
2. Press the Channel Up or Channel Down button
Roger Beep Off
to select roger beep on or off.
3. Choose one of the following:
a. Press the Mode/Power button to enter the
new setting and return to Standby mode.
b. Press the Lock button to enter the new setting
Channel Button Channel Button
and return to Standby mode.
12
Introduction
NOAA* All Hazards Radio Channels
•
You can use your microTALK radio to listen to NOAA All Hazards Radio
channels transmitting in your area.
Weather Button
Hazards Radio Icon
Channel Button
Weather (WX) Alert Mode
Turning On the Weather Alert function will allow your radio to automatically
•
receive NOAA Hazard Alert radio signals and warnings from designated NOAA
broadcast stations. If the radio is turned ON, it will alert to Weather and other
emergency alerts broadcast by NOAA.
This feature is set
to OFF by default.
Mode/Power
Weather Button
Operation
Customer Assistance Warranty
To listen to All Hazards Radio channels:
1. Press the Weather button until the All Hazards
Radio icon and the currently selected All Hazards
Radio channel are displayed.
2. Use the Channel Up or Channel Down
button to change All Hazards Radio channels.
3. The All Hazards Radio icon will continue to
be displayed when All Hazards Radio is on.
4. To exit All Hazards Radio, press and hold the
Weather button until On or Off is displayed.
*National Oceanographic and Atmospheric Administration
Make sure the strongest
Weather channel is selected
for your area using the NOAA
All Hazards Radio Channels
selection in the previous menu.
To turn Weather Alert On or Off:
1. Press the Weather/Lock button until the Weather
Alert icon flashes on the display. The current On
or Off setting is displayed.
2. Press the Channel Up and Channel Down button
to turn Weather Alert On or Off.
3. Press and hold the Weather/Lock button again to
save the new setting and exit the Weather Alert
Mode and return to Standby mode.
This radio is rain resistant to JIS3
standards.
Nothing Comes Close to a Cobra
•
•
13
®