Table of Contents
Advertisement
Basic Operation
Menu operation
1
Input Setup
Press INPUT key on the remote control to enter "INPUT
SOURCE" menu. There are eleven options for you to select:
DTV, ATV, AV1, AV2, Component, PC-RGB, HDMI1, HDMI2,
HDMI3, HDMI4 and USB Use ▲/qkey to move the cursor
to the input you desired and press OK key to confirm.
2
Channels Selection
There are four ways to select channel:
1) Using number keys, and OK keys on the remote control to
select channel directly.
To select channel 90, press
When you use the number buttons, you can directly select
channels that were either erased or not memorized.
2) Using PROGr/s key on the remote control or on your TV to select channel.
When you press the PROGr/s key, the TV changes channels in sequence. You will see
all the channels that the TV has memorized.
You will not see channels that were either erased or not memorized.
3) Press RECALL key to return to previous channel, press it again to return to current
channel.
To quickly switch between two channels that are far apart, tune to one channel, then use the
number keys to select the second channel. Then use the RECALL button to quickly
alternate between them.
RECALL is not activated if no channel has been changed after TV turning on.
4) Select channels from "All Channels List" or "Favorite Channels List".
Press OK key to choose from "Channel List" menu.
3
Volume Adjustment and Mute Setup
Volume adjustment
Press VOLr/s key on the remote control or on the TV to display "Volume" menu,
adjust the volume of TV between 0 to 100 by using VOLr/skey:
-To increase the volume, press VOLr key;
-To decrease the volume, press VOLs key;
Mute
Press MUTE and the sound cuts off. The MUTE icon will appear in the lower-left corner
of the screen.
To resume sound, press the MUTE button again, or simply press the VOL r key.
9
0
.
25
Input Source
DTV
ATV
AV 1
AV 2
Component
PC-RGB
HDMI1
HDMI2
HDMI3
HDMI4
USB
Select
OK
OK
Advertisement
Table of Contents
