• The example above shows how the isosceles triangle ABC (CA = BC) changes when the equation in the
Geometry Link row is changed from
Tip
• Pressing E after changing data in a Geometry Link updates the corresponding figure in the Geometry window.
• Changing the figure in the Geometry window will cause the linked data in an eActivity to update accordingly.
10-2 Transferring eActivity Files
File Compatibility
Note the following precautions when using the ClassPad's data communication function to transfer eActivity
files with another ClassPad unit or a computer.
II
• The ClassPad
supports only eActivity files created with a ClassPad
eActivity files created with another ClassPad model cannot be opened by the ClassPad
• You may not be able to open an eActivity file created using a newer version ClassPad
II
version ClassPad
.
Transferring eActivity Files between a ClassPad Unit and a Computer
You can transfer eActivity files between ClassPad and a computer. For details, see "19-2 Performing Data
Communication between the ClassPad and a Personal Computer".
Transferring eActivity Files between Two ClassPad Units
You can connect two ClassPad
about how to do this, see "19-3 Performing Data Communication between Two ClassPads".
y
x
= 2
+ 1.581 to
II
units to each other and transfer eActivity files between them. For details
y
x
=
+ 2.
II
unit or with ClassPad Manager.
Chapter 10: eActivity Application 185
II
.
II
using an older